SUS304 28khz/40kHz Immersion Ultrasonic Cleaner Skymen Waterproof Ultrasonic Immersible Transducer

Why need the Immersion Ultrasonic Cleaner?
If you have your own water tank, to get transducer packs would be good to make the cleaning effect more efficiency!
Any tank can become an ultrasonic cleaning tank with SKYMEN drop-in Immersible Ultrasonic Transducer. Made from highly polished 316L/304 stainless-steel, these transducers assembly is hermetically seal welded with a stainless steel back cover. This ensures the water-tight submersible ultrasonic transducer that will reliably operate in any cleaning tank.

Features of Ultrasonic Immersible Transducer

• Powerful ultrasonic cleaning system up to 1500 watts at 28 kHz, 40 kHz, 80 kHz, 100 kHz, 120 kHz, ect
• Transducer may be installed either horizontally or vertically in tank
• Submersed Transducer can operate in temperatures up to 100 celcius
• Entire stainless steel structure: acid proof and bears the alkali,artistically and durable.
• Adopt fission style structure: high frequency connection with jack on is used between ultrasonic immersible transducer and the ultrasonic generator, useful and maintains conveniently.

Benefits:

• Easy to install in any tank
• Easy to move
• Multiple configurations to accommodate your requirements
• Can be used with the Water Resonance System to provide an optimum cleaning solution

There are many ways to install the ultrasonic immersible transducer: set on the bottom, surface, the side or the topof cleaning tank according to needs.



Application of Ultrasonic Immersible Transducer
Pre-plating cleaning for parts to be plated, oil and dirt removing for metal mechanical. Parts, cleaning semi-conductor Si-chips, spectacle frames and glass vessels.
Lens, sunglasses, short-sighted mirror and prism, the microscope, camera, glass equipment, etc.

Inside of Ultrasonic Immersible Transducer

Plywood packaging show




Advantage of Skymen Waterproof Ultrasonic Immersible Transducer

1. Easily adapted to existing process lines;

2. Industrial Design, and Durability;

3. High efficienty magnetostrictive transducers;

4. 40K Or 28KH for varies cleaning objects.

Ultrasonic Cleaning FAQs

Q:Can an ultrasonic cleaner properly clean blind holes and top parts of items?

A: If the blind holes and top parts of the items are accessible to the cleaning solution, these areas can be thoroughly cleaned by the ultrasonic cleaner.

Q:How long should the cleaning process be?

A: Usually 8-15 minutes is ok. The length of time needed to clean items depends on factors such as the cleaning solution, contaminants, temperature, and how clean you want the items to be. As soon as the ultrasonic cleaner is put into operation, some of the contaminants are removed right away. Adjusting the cleaning time is usually done to make up for anything that is lacking in the other factors involved in the cleaning process. Unless you are already an expert in ultrasonic cleaning, you should determine the amount of time needed to properly clean a particular item by actually cleaning it.

✮ Skymen sets up branch in Hong Kong in 2009

✮ Mold injection department was established in 2013

✮ Skymen sets up independent marketing center in 2016

✮ Independent manufacturing center and R & D center was set up in 2017